Login

Get the Right Video Connection on Your HDTV PDF Print E-mail
Home Theater How-To
Written by Greg Keene   
Tuesday, 19 September 2006
HDMI PlugHDTVs have numerous video connection options. Getting it right versus wrong is like the difference between night and day in viewing pleasure. So, if you're not totally certain about your setup, spend a few minutes to get it right by Reading More in TechDigs.net How-To.


You bought that new HDTV hoping to see the 'perfect picture' that exemplifies HDTV. However, not all content viewed on an HD display is equal. Even on your best picture, you may not be getting all you can out of your HDTV. The type of connection you choose to send the video signal from your set-top box, DVD player, game machine and other devices significantly impacts how your HD display will look.

HDTVs normally have a number of different video connections (low to high quality):

Composite video: a one-signal analog video standard which carries grayscale and color over two connectors inside the wire. Y represents luminance or brightness. U and V signals carry the color. This is the lowest-quality input. Its use is not recommended on HD displays.Composite Video
S-Video: a one-signal analog video standard which carries the grayscale and modulated color with two grounds over four connectors inside the wire. At 480i, this is a low-quality input. Unless its your only option, it should not be used on HD displays.S-Video
Component video: a three-signal analog video standard which carries the red, green and blue over three separate wires. Capable of up to 1080p, this is an HDTV-capable input. Because it is not digital, it is the recommended option only if DVI or HDMI are unavailable.Component Video
VGA (Visual Graphics Array): an analog computer display standard created in the 1980s, originally at 640x480. Improved over the years, today's VGA connectors can support substantially more than that -- even beyond HDTV standard (1920x1080). While some HDTV displays contain VGA connectors, because VGA connectors are analog, you'll want to choose DVI or HDMI over VGA when given the option.VGA
DVI (Digital Visual Interface) video: a digital standard for connecting displays to computers and other electronic devices (like cable boxes, DVD players, etc.) in order to provide digital high-bandwidth (7.4+ gigabits) at a maximum of 2.6 megapixels -- which is larger than the HDTV standard of 1920x1080. Since DVI is high-quality HDTV-capable digital input, it or HDMI is the preferred connection for your HD setup. Most HD displays use the DVI-D cable.DVI
HDMI (High Definition Multimedia Interface) video: a more recent digital standard for high-bandwidth visual communication that adds digital quality audio to the interface. With the use of a simple adapter, DVI and HDMI devices work well together. Since HDMI is high-quality HDTV-capable digital input, it or DVI is the preferred connection for your HD setup.HDMI

In reading through the descriptions above, it's clear that you should use a digital (either DVI or HDMI) connector unless your playback device doesn't have one. Below is a quick rundown of connections and the playback devices that support them.

Devices that generally support digital connections include:

  • HDTV digital cable set-top boxes: if your cable box doesn't have one, ask your cable provider -- they can usually provide a new box that does have one at no charge.
  • HD-DVD and Blue-ray players: all of these players support DVI or HDMI.
  • XBox 360: it's an option for the newest XBox.

Devices that often support digital connections include:

  • Upscaling DVD players: DVD players which improve the quality of the DVD picture up to 1080p. Nearly all of these have DVI or HDMI.
  • Computers: most new graphics cards and computers support DVI, and some support HDMI.
  • HD camcorders: some of the newer HD camcorders have special cables which allow them to connect to HDMI or DVI.

Devices that generally don't support digital connections include:

  • DVD players: most standard DVD players only have component, S-Video, and composite video connections. Use component video for DVDs that don't have DVI or HDMI.
  • XBox: the original XBox does not support better than component video.
  • Playstation 2: The PS2 doesn't support digital video connections. Purchase a special PS2 component cable at consumer electronic outlets like Amazon and Best Buy to get the most out of your PS2.
  • VHS VCR (yes, some people still us them): do not support digital video connections. Most will only support composite video, some support component. Use the best quality connection available on your specific VCR.
  • Camcorders: Unless you have a new HD camcorder, your camcorder is unlikely to support better than S-Video. Use the best quality connection available on your specific camcorder.

For the majority of people, the most important playback devices in their home theater are the HDTV set-top box, DVD player and a game machine or computer. For these devices, I suggest you try to get them all to digital. Since most HDTV set-top boxes support digital connections, that's as easy as buying an HDMI/DVI cable. Generally, only upscaling DVD players support digital video connections. While devices range from $75 to thousands of dollars, upgrading to even the lower-end of the upscaling DVDs can provide a significant improvement if your current DVD supports only progressive scan. (We'll cover upscaling DVDs in a future article.) For computers and game machines, it depends on the device. The third generation XBox 360 and forthcoming PS3 both support digital video connections, the second generation units don't. If you frequently use your computer on your HDTV (playing Half-Life 2, for example), then upgrading your video card to support DVI may be worth it. If your computer doesn't support DVI and you are lucky enough to have a VGA connection on your HDTV, then using that connection provides good results.

If you don't have enough inputs on your HD display, or if you are using your receiver to switch DVI/HDMI and don't have enough inputs, dedicated digital video switchers like the Gefen 4x1 HDMI Switcher can solve your problem.

Trackback(0)
Comments (14)add comment

Carthik said:

 
Hi I have a 29 inch Sony CRT type HDTV. I want to know if there would be any difference between a sony component cable and a cheaper type of component cable like a philips for 10$ to connect my home theatre to the TV... and would the difference vary if i used a cheaper component cable for the PS2? Thanks!!
April 02, 2007

TechDigs.net said:

 
Carthik:

In general, cable cost isn't the issue. For analog cables the biggest issue length vs. gauge. We tend to like the 18 gauge or RG-6 sized cables as opposed to RG-59 for longer cables or cables that could be near lots of power transformers (wall warts). My favorite place to get cables is Monoprice. Here's a link to their component cables. If you want a component cable you can use for any purpose and with the best shielding, stick with RG-6/18 gauge. For short cables in many situations, the RG-59 will work fine.

We don't have a relationship with Monoprice, so your purchase there does not provide us any revenue, we just like their products and service.
April 02, 2007

Carthik said:

 
hey! thanks for getting back so fast... ummm i don't really understand the gauge and all. I hardly need any length cuz my TV is right above the dvd player on the stand... and both my tv and home theatre are sony, so i was wondering if using a sony component cable would give me the best performance...
April 03, 2007

TechDigs.net said:

 
I wouldn't spend any more on a Sony component cable - there's nothing special at all about them ---- period. It's not worth it. However, if you have one, it'll work just fine. In terms of gauge, don't worry about it. Given the short distance, any 3 foot cable on the component cables link I provided above will work fine. The best cables are RG-6 (note that in the description on that page), but at short distances it's usually unimportant. If you have a cable already, just use it, it'll probably be great.
April 03, 2007

Carthik said:

 
Thanks a lot for all the help man! I really appreciate it! is it worth buying this one by acoustic research for 25$?
* Gold-plated, corrosion-resistant, precision-made connectors lower signal resistance
* 100% Mylar® foil and copper braided shields helps minimize noise and interference
* Foam dielectric insulation maintains 75-ohm impedance for optimal signal transfer
* Solid, oxygen-free copper center conductors for more accurate video reproduction

Last question, I promise!!
April 04, 2007

Carthik said:

 
what difference do you think this would make compared to a std component cable?
April 04, 2007

TechDigs.net said:

 
That AR cable is a good cable, but it's no better than this cable at half the price and probably similar to this cable at less than a quarter the price.
April 04, 2007

Carthik said:

 
This is easier to get cuz i can just go up to the store and buy it.... i sorta prefer this method...
http://www.radioshack.com/product/index.jsp?productId=2465380&cp=&sr=1&origkw=philips+component+cable&kw=philips+component+cable&parentPage=search


is the above cable as good?
April 05, 2007

Carthik said:

 
heres the proper link

http://www.radioshack.com/product/index.jsp?productId=2465380&cp=&sr=1&origkw=philips+component+cable&kw=philips+component+cable&parentPage=search
April 05, 2007

TechDigs.net said:

 
Carthik:

Understood. Yeah it's probably similar to the $4.21 (RG-59) cable at Monoprice. Note, if you have NXG cables in stores around you, they're also good at a pretty decent price.
April 05, 2007

Carthik said:

 
Sorry I haven't written in a while! exams... haha. anyway, thanks a ton for all the help! I've decided to go for this one on mono price...
PREMIUM 3FT 3-RCA Component Video Coaxial RG-6 18AWG 75Ohm CL2 Rated Cable
April 21, 2007

Carthik said:

 
Hey! I finally got the component cable! but the picture is sorta greenish... I checked the connections, the red on my dvd player is a lil loose but other than that they are in the right sockets. any idea what i might be missing? thanks for all the help!
June 04, 2007

Sal. said:

 
I am looking for a DVD player to show movies on my VIZIO HDTV but when I look for them most of them say that they don't have a tuner. How do they work and next to the units it says that by 2009 they won't be any good anymore. It is obvious that I am not that sharp on this. Can you steer me in the right direction. I don't want to spend a fortune. And by the way I don't rent to many movies.
February 26, 2008

thomas said:

 
Does HDTV which now using digital cables still distinguish PAL and NTSC formats? THE reason I ask is that I have an NTSC HDTV in the United States and wasnt sure if the TV will work in Hong Kong (PAL format)
May 27, 2008

Write comment
quote
bold
italicize
underline
strike
url
image
quote
quote
Smiley
Smiley
Smiley
Smiley
Smiley
Smiley
Smiley
Smiley
Smiley
Smiley
Smiley
Smiley

security image
Write the displayed characters


busy
 
< Prev

TechDigs.net Privacy Policy

Creative Commons License
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivs 2.5 License.